Fix Your Stuff Community Store

Repair and service information related to the ResMed AirSense 10 CPAP machine. Also known as the ResMed Air10.

28 Questions View all

Options

My humidifier heater isn't working.

My Airsense 10 is about 2 years old. My humidifier heater quit. I pulled the cover and checked the fuse and it is good. I don't have a schematic to check the test points. Could you give me some info on the heater?

Thanks!

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
1 Comment

Yes this is the fuse under the heater plate. I unclipped it to test its continuity.

by

Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

Bg Higg by checked the fuse I assume your are referring to the one under the heater unit like shown on here Data on the heater is not freely available so I would go ahead and replace the heater on use a bench power supply to see if that could run the heater.

Was this answer helpful?

Yes No
Score 1
Add a comment

Add your answer

Bg Higg will be eternally grateful.
View Statistics:

Past 24 Hours: 2

Past 7 Days: 9

Past 30 Days: 20

All Time: 311