Skip to main content

Model No. A1367 / 8, 16, 32, or 64 GB capacity

913 Questions View all
Question Closed

After replacing Digitizer & LCD, there is still no response on Digi?

After replacing the Digitizer & LCD to a customer's iPod Touch 4th Gen, I still get no response from the screen. I know it's not the screen because i swapped out four different Digitizer & LCD screens. The LCD screen lights up. The connector to the Digitizer does not look damaged at all. The broken screen worked just fine before I removed it.

Any ideas?

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

It sounds like the the cable connector is not plugged in .

Or the cable itself is damaged even though it looks ok.

Or else you got a bad dig/lcd assembly.

Only thing to do is try a new assembly. Good luck.

One thing eveybody should do is to test it before glueing it down.

Was this answer helpful?

Score 0

1 Comment:

I've tried four different screens. Still having the same problem with all four screens. And I did end up putting those four screens in different ipods, and they worked in those.

by

Add a comment

The only other assumption is that the connector on the motherboard is broken. Must have gotten damaged while trying to plug it in.

I feel your pain.

Was this answer helpful?

Score 0
Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 592