Skip to main content

Model A1989, EMC 3358. A refresh of the existing design, with updated processor options and a change to the keyboard materials. Available in Silver and Space Gray. Released in May 2019.

127 Questions View all

5v 0.2A on charger any ideas where to start?:)

I have a very minor case of water damage on a MacBook Pro A1989 it also has no burned components but has capacitors and resistors missing from previous repair attempts does by a different shop any ideas/advice on this MacBook as I’ve never worked on a device the new before only the oldish mbps and airs

Any advice would be greatly appreciated


Answered! View the answer I have this problem too

Is this a good question?

Score 2

Thanks for the reply it is greatly appreciated:)


@hellomacos did you find the problem




I kind of found the problem

There are components missing on the board

But the video that you recommended pointed me towards the CD3215 chips but I didn’t really know how to test them


do you need brd and schematics ?


I think I have them but I don’t have a reader that can read them so I have no way no f confirming that


Show 6 more comments

Add a comment

2 Answers

Chosen Solution

Was this answer helpful?

Score 3
Add a comment

First try to reflow the solder on the port.

Was this answer helpful?

Score 1

1 Comment:

Thanks for the answer it really helps but the ports on this MacBook are the ones that are on a flex cable:)

Thanks again


Add a comment

Add your answer

HelloMacOS will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 13

All Time: 392