Rep: 13
1
1
Hi im working on installing MacBook Pro 15" Unibody 2.53 GHz Mid 2009 LCD guide.
I have a question about steps 22-25. Because i have to soften the glass adhesive with the heat gun. When im reassembling my device, i dont know what kind of adhesive do i have to use when im mounting the glass again
Is this a good question?
Rep: 13.3k
45
21
11
With a bit of luck you can reuse the old adhesive. Just press the glass on, heat up again and apply gentle pressure. Failing that, the adhesive used is classic 3M double sided tape (black). The original strips are cut in fancy shapes to make room for the camera, microphone and the various magnets in the assembly. You will have to be a bit creative here ;-)
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 2
All Time: 813
