Skip to main content

Repair and disassembly information for the first-generation Apple Watch SE, announced September 18th, 2020.

30 Questions View all

Can you name this part..!

I was fixing my I watch had a dead battery and I accidentally ripped the side of this cable shown in the image looks like a ground.. after looking on Google and asking what the cable was or even know what it is? anyone on here help as I need it thanks

Block Image

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Chosen Solution

@steveboy86 that is your display cable. Also referred to as the LCD Touch Screen Flex. Check places like this as well as other possible sellers

Was this answer helpful?

Score 0
Add a comment

System in Package (SIP) module with its ribbon cable unit which connects to the display assembly. Apple doesn’t offer the cables as a serviceable spare to their repair depots. The full SIP will need to be swapped out. If you can find a watch for parts you might be able transfer the cable unit but its not easy!

If you damaged the shielding part you might be OK. I use some conductive copper foil which I insulate on top to connect the two parts together after exposing some of the copper for the foil to connect to 3M RF EMI Copper Foil Shielding

Was this answer helpful?

Score 0
Add a comment

Add your answer

Ste will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 9

All Time: 284