Skip to main content

Model A1181: 1.83, 2, 2.1, 2.13, 2.16, 2.2, or 2.4 GHz Core 2 Duo processor

1203 Questions View all

Magsafe Board changed...No power!

I'have changed the Magsafe board. Magsafe LED is green,

But no power

Reset SMC

connector keyboard ok

It's a MacBook 2009 white. I think that the keyboard does not function, and i dont find power connector on the logic board.

thank you for your help

Answer this question I have this problem too

Is this a good question?

Score -1
2 Comments

Please give us the last 3 characters of your serial number so we can verify your exact machine.

by

It' a early 2009 the Keyboard was changed and the serial is on the Keyboard

by

Add a comment

1 Answer

Most Helpful Answer

Check the voltages at the battery connector using a multimeter or similar. The two outer pins are ground. The three inner ones should read something around 3,5 V. If the machine suffered a spillage have a hard look at the Magsafe -> board connector and also at the Board -> battery connector.

Was this answer helpful?

Score 3

1 Comment:

The 16.5 VDC, pinout is on the right side of this link: http://en.wikipedia.org/wiki/MagSafe

by

Add a comment

Add your answer

Mikhrych will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 437