Skip to main content

Released September 21, 2018. Models A1920, A2097, A2098, A2100. Available as GSM or CDMA / eSIM or nano-SIM / 64, 256, or 512 GB / Silver, Gold, or Space Gray. (Pronounced "iPhone 10 S.")

228 Questions View all

Screen will not wake after replacement.

I have just replaced the screen on a friends iphone xs. I removed battery first and followed the guide to the letter. When i first turn on the phone the screen comes on, i put in passcode and can use apps, surf the net everything. As soon as i lock the screen or it locks itself, then it will not turn back on. The phone still works as i can feel it vibrate and can soft reset it. After soft reset, the screen works again, until locked. Anyone else had this problem?

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Hi, put the old screen back and see if problem is go away. So you know if it is a faulty screen you received or it is a other problem.

Was this answer helpful?

Score 0


Hello. Yes i tried the old screen and that works fine, as it should. Never seen this problem before. Screen come on after boot and soft reset but just will not wake off button, tap or lifting the phone. I thought it must be the screen, just know there are so many issues when changing parts on apples. Many thanks Leslie


Add a comment

Add your answer

Trevor Webb will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 6

All Time: 17