Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

3247 Questions View all

It is possible to change the Black digitizer mounting frame?

Hey there,

my digitizer mounting frame is damaged, because i dropped it. :-(

It is possible to change the digitizer mounting frame?

Exactly this one: ?

Or is it bonded?

Thanx for help!

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Chosen Solution

It is possible but it is glued to the digitizer, the couple of times I have done it I have just patiently separated them with a very thin spatula, might be easier if you have a heat gun [set to low ;]]

Was this answer helpful?

Score 2
Add a comment

Are there any videos or step by step guides on this kind of repair? I have a few nicks and one or 2 chips on the mounting frame, but not the screen itself and I was looking to repair it myself if possible, but even in a complete teardown there is little info on replacing that part.

I much prefer my phone without a bumper to have to cover the unsightly chips/dents etc!

Any help is appreciated.

Was this answer helpful?

Score 0
Add a comment

Add your answer

Viktor P will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 387