Fix Your Stuff Community Store

Model A1418 / Late 2013 / 2.7 & 2.9 GHz Core i5 or 3.1 GHz Core i7 Processor

239 Questions View all | 27 Parts Shop

Options

Display "Dot" but is not a dead pixel

Well,. i recently changed my hhd for an ssd, and i am pretty sure that the display assembly was never touched because i was there during the whole process… but right now there is a stain in my display… Any suggestions?

Block Image
Block Image
Block Image
Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

This looks like one of three things :

  1. Assuming that the display is lit with LED’s, it looks like one or a couple LED’s burned out.
  2. It could be a locked or stuck pixel , to which I would use UDPixel to run the undead pixel dot at a space of 5x5 and move the flashing dot where the spot is for a few minutes.
  3. Finally, it could be a dead pixel with no real solution, and you can either accept it, or look into replacing the monitor.

All of this is given without any guarantee of fixing the issue, and is my personal opinion.

Was this answer helpful?

Yes No
Score 1
Add a comment

Add your answer

MasterG will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 55