Skip to main content

A1706 / EMC 3071—Released in November 2016, this 13" Macbook Pro introduces the OLED Touch Bar. Features a dual-core "Skylake" Intel Core i5 CPU and four Thunderbolt 3 ports.

200 Questions View all

Do you think the power connector can be soldered to the logic board?

Hi guys,

Do you think is there any way to solder back this connector to the logic board? I asked some local repair shops but they told me that it is not possible. Any hint would be very appreciated. Also, if you know any shop in Europe able to do the repair it would be great.

Regards,

Block Image

Block Image

Block Image

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Most Helpful Answer

Its hard to tell looking at your image. If the solder pads are still present and the connector its self is not damaged someone with the proper tools should be able to remount it. If there is damage someone with deeper patching skills will be needed to fix the logic board traces and maybe a new connector.

I would contact these folks TheBookYard, Liverpool UK

Was this answer helpful?

Score 1
Add a comment

Add your answer

Silviu Matu will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 16