Fix Your Stuff Community Store

Released September 16, 2016. Model 1660, 1778 Available as GSM or CDMA / 32, 128 or 256 GB / Rose gold, gold, silver, black, and jet black.

2264 Questions View all

Options

Touch id and home button cause iPhone 7 in apple logo loop

Some days ago i clean the front and back body of iphone 7 with a wet cloth after some days it’s home button and touch id not work properly it works sometimes and sometimes it didn’t .when i restart the phone ,it stuck on apple logo loop.then i open to repair phone and i plug out the home button strip and plug in again ,it turn on without any problem and work good when i assemble and restart ,it again stuck on apple logo then i plug out the home button strip and iphone starts working good without home button. Now what should i do now ?should i replace it or can i fix it .

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

Take out carefully the home button and clean it with high percentage alcohol, I think when you have cleaned it it will no longer start in a loop.

Was this answer helpful?

Yes No
Score 0

2 Comments:

What should i clean ? The strip or touch id?

by

Clean the front and back side of the home button and flex connector. Use a soft toothbrush and some alcohol, wait until everything is dry before putting it back.

by

Add a comment

Add your answer

John wick will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 43