Rep: 1
1
I just replaced my iPhone 8 Plus screen, no every time I go to my phone after it has sat locked the screen is dimmed all the way to the lowest and I always have to turn the brightness up. I even took the new screen off and checked all the connections. Also I checked all the auto brightness settings. Any help is greatly appreciated!
Is this a good question?
Rep: 128
7
1
3
You may have to buy a tool to copy the serial code from the old screen onto the new one, if you still have the old screen.
Was this answer helpful?
I've replaced the screen on this phone before from ifixit and it wasn't a problem. I did the same repair so I don't see how that would apply. Thank you for the suggestion though.
Updating to the newest version of IOS fixed the issue. Thank you.
Rep: 3.1k
5
2
1
Maybe you havent transfer the filter from broken screen to new screen, the filter for proximity sensor. Or you can test this by stick a piece of tape on your new screen and colored this with a waterproof marker to make tape darker ( after the test you can easely take away the tape) so the sensor get less light.
Was this answer helpful?
I updated to the newest IOS and that fixed the issue. Thank you
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 30
