Fix Your Stuff Community Store

Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 8, 16 or 32 GB capacity / black or white plastic back.

1500 Questions View all

Options

Why is my earpiece not working?

So I fixed my iPhone a while back and I still remembered that before I had done the fix, the earpiece worked perfectly fine. However, now that the phone is fixed I dont hear anything from the earpiece whatsoever. The only means of communication through the phone are either using the speaker phone, bluetooth, or just headphones. I am contemplating on getting a new earpiece to see if that'll work, but I'd rather ask first to see what you guys think. Other than that everything works great on the phone! So..any thoughts...

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
1 Comment

WHAT DID YOU "FIX" ON IT?

Did you try the quick inand out with the plug?

Or blowing it out with air in a can?

Tinner

by

Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

have you try with the loud speaker . then may be a earpiece or flex is not properly connected to logic board. check the connecter no 3 is properly connected . if connected then open the display assembly there you will see the small piece of iron see:

iPhone 3GS Display Replacement

see the step 11 you will see a small screw holding that remove and try gently remove that portion then you get the earpiece . check with multimeter whether is working or not or just change it ..

Was this answer helpful?

Yes No
Score 2
Add a comment

Add your answer

Gerardo will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,044