Fix Your Stuff Community Store

Google's third-generation Pixel-branded smartphone, and their first "notched" phone. Comes with a 6.3" QHD+ OLED display and 64 or 128 GB of storage. Available in Nearly White, Just Black, or Not Pink.

77 Questions View all

Options

Screen stopped working after charging assembly replacement

Hi,


My phone stopped charging using the USB-C port on my phone so I replaced it then it started working again. After some time the port stopped working again so I took the phone apart again, when I did I found that the black cable was loose which I fixed. I tried to turn on the phone again but the phone is not turning on again. It’s also worth noting that my computer is displaying a “USB Device not Recognized” when connecting to a PC. Do I give up and get a new phone?

Thank you

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

There may have been the possibility of you damaging the display while attempting the second repair or at leas the display connector. Take it apart and make sure the display is connected. If a computer is at least detecting it, I would imagine the phone is at least booted up to the lock screen. I would plug it into a computer to make sure it’s detected and then attempt to call it, assuming you left it on ring or at least put it on vibrate. But even then if the phone rings on the other line rather than sending it straight to voicemail, it can confirm the phone is at least powered on, booted up, and it just needs a new screen.

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

Moya Alhayek will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 50