Rep: 11
1
Missing all 5 (+1) screw being careless when taking MacBook apart but now it won’t power on and all cables are attached. Are all screws on logic board required for power to happen or am I missing something else?
Is there something missing
Is this a good question?
Rep: 478.9k
35
329
970
Yes, you do need to mount the logic board fully. There maybe one or two mount points that could be left un-mounted. I’m sure no one has made a detailed study on which ones and if its safe to do (don’t play Russian roulette).
Here’s the needed screws MacBook Pro 13" Screw Set - Logic Board (x5)
You talk about a sixth screw Using the MacBook Pro 13" Two Thunderbolt Ports 2019 Teardown can you point it out.
Looking at the guides I do see you lost the insulator
Was this answer helpful?
I replaced the screws thank you Dan. Think I may be missing something else though might have been a silver piece near the power button area. It’s all I can think of since the unit is still not powering on and was prior to me disassembling
Past 24 Hours: 0
Past 7 Days: 3
Past 30 Days: 14
All Time: 521
1 Comment
Dan, is this Insulator known by any other name. I am having trouble locating a replacement.
by Anthwon Newton