Replaced the battery, phone worked for a couple days, then screen started to malfunction. Took phone apart, checked logic connections, phone worked again for a few days, then same problem with touch screen not working/unresponsive. Took apart again, checked logic/screen connections and phone is now non-functional/scrambled screen only. Can I replace any of these connectors or is the phone aced?
Is this a good question?
Rep: 223
4
1
Unfortunately I’ve had this to me a few times after a battery replacement and 9/10 it always comes to the touch ic chip on the board. If you can replace yourself, cheap fix otherwise if you have to take to a repair shop they usually will tell you to upgrade as it isn’t worth the repair as it is a very common fault.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 59
