Fix Your Stuff Community Store

Repair information and guides for the iPhone 6S released by Apple on September 25, 2015. Models: A1688, A1633

2688 Questions View all

Options

Two phones, two batteries. Won't hold charge?

Greetings!

So I had two identical phones I wanted to replace both charging ports and batteries. Now that both replacements are complete neither will accept a charge? Both batteries had about 20% charge when I plugged them in for calibration. Lightning bolt showed they should be charging however the phone screen said charged? I watched both phones on good chargers dwindle down until they shut off. Next day they won’t turn on and I cannot find anything online about this issue. Might anyone have some insight into what may be happening?

Thank you in advance!

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

2 Answers

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

Maybe it’s an issue with the replacement charging ports or batteries you installed. I would suggest trying the phones with their original parts to see if that’s the issue.

Was this answer helpful?

Yes No
Score 1
Add a comment

Options

Thank you for the reply Levi! I believe I may had a user error? I swapped the screens and checked all the internal plugs. No issues. I decided since I assumed the batteries should be fully charged I held down the hard reset buttons. After about 10 seconds the Apple logo appeared and everything was fine! Batteries are holding a charge and phones/charging ports working fine.

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

DANA BENNETT will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 33