Our Ninja BL700 stopped spinning. I disassebled the unit and the plastic 3 gear unit at the top had shredded teeth not allowing the unit to spin. Ninja does not offer a replacement part but saud I can purchase a replacement base. Does anyone know where I can purchase the part. An internet search has not been fruitful. Thank you.
Is this a good question?
Rep: 1k
9
2
1
If you are talking about the gear-looking part on the drive shaft that meets with the bottom of the blade assembly, it is called a coupler or coupling. I haven't found one for Ninja, but there are a lot for kitchen aid and waring around. I would wonder if one of these is 'compatible'.
Example: https://www.ereplacementparts.com/coupli...
Similar question: The flexable rubber coupler has broken..
In that, this guide is referenced which includes a rebuild of the planetary gear assembly. I see now this is what you really needed
Was this answer helpful?
No. It is the gear unit that turns the coupler.
Broken 3 gear unit that turns the coupler.
Check steps after 9 on this https://sites.google.com/site/dgeake51/h...
Past 24 Hours: 0
Past 7 Days: 4
Past 30 Days: 37
All Time: 1,132
