Fix Your Stuff Community Store

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White. This page aims to help users troubleshoot, fix, and seek help for the iPhone 4.

2375 Questions View all

Options

iPhone 4 cycles continuously when connected to computer

My iPhone 4 was fully submerged in water several months ago. It fully dried out, but would not start, so I ordered a new battery, which I just replaced yesterday. The phone will now turn on when plugged into the wall, and loads the "plug into iTunes" message. When plugged into my computer, however, the phone displays the apple logo for a few seconds, then restarts and does the same thing continuously. Ideas? Does the board need to be replaced? Apologies if this question has already been asked.

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

Molly, I would start of with this guide Some of the steps you can skip, since yours is not acute anymore. My concern with your logic board is corrosion. Clean the board, the connectors and the cable ends very well, and carefully. After that, reevaluate and see what happens. You can also try a program like iReb and see if it can be kicked out of whatever loop it is in. DO NOT FORGET to clean your corrosion....:-) Good Luck

Was this answer helpful?

Yes No
Score 2
Add a comment

Add your answer

Molly Elfers will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 190