Skip to main content

Canon's Rebel XT is one of Canon's early entry-level DSLR's. Also marketed as the EOS 350D and the EOS Kiss Digital N.

32 Questions View all

Flash doesn't work when fully up

Hi

I've got EOS XT also known as 350D and the flash suddenly stopped responding. It will pop up in automatic mode under low light but won't flash nor will strobe to help focus.

It did flash when the flap was manaully pushed down half way through but it's not doing it even in this position anymore.

Any ideas how to fix it if it can be fixed?

Thanks

Dazz

Answered! View the answer I have this problem too

Is this a good question?

Score -1
Add a comment

2 Answers

Chosen Solution

my guess is that there is a metal contact that has been bent/broken from flash battery to your bulb.. As to how that would be fixed? The guides on here can be found at the top of the page..there are plenty of eos camera's and the old rebel, I'm fairly sure that by reading through them you'll be able to work out how to get that top panel off. If you are very lucky Gabe or oldturkey03 may have some better information or manuals. All the best..

Was this answer helpful?

Score 2
Add a comment
Most Helpful Answer

Dariusz, I believe that my colleague pollytintop is right., There is a micro switch that is being engaged ( or disengaged) pending if you use a horseshoe flash. See if that one is stuck. For a more in depth repair, download the service manual for your camera from here It is a large document and depending on your connect speed may take a while ;-) Let us know how it is going and good luck.

Was this answer helpful?

Score 3

1 Comment:

knew you'd have a manual up your sleeve! ;-)

by

Add a comment

Add your answer

Dariusz will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 3,546