Touch does not work
Hello. my Problem is Iphone 3GS touch does not work , I change touch, but does not work. help?
Is this a good question?
Hello. my Problem is Iphone 3GS touch does not work , I change touch, but does not work. help?
Is this a good question?
First step is Reset, hold both Home and Power buttons until the iPhone begins to restart itself. Usually less than 20 seconds.
If still problem. Possibly Flex Cable #2 (Digitizer Flex) has come loose from the Logic Board.
If still problem. You may need to replace the Front Glass, it normally has the Digitizer attached at the Factory. So this would be Front Glass with Digitizer replacement for 3GS it is one part.
Before opening iPhone 3GS and during any repair make sure the iPhone is OFF or you risk damaging the LCD Display or Display Logic Board Controllers.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 170