Model A1288 / 8, 16, or 32 GB capacity

580 Questions View all

problem after replacing iPod screen (unlock slide dosnt work)

i replaced my ipod screen and put a new one, after i put it all back together the unlock slide nore the exit slide work except the cancle button,if u have the solution please contact me at ca13juliovargas@hotmail.com thank u for ur time.......god bless u all :)

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Make sure the connector is firmly in its place, sometimes the connector not being fully seated will cause this. You might also check the flex cable on the digitizer, they tend to tear easily when you install them. You might also just have a defective digitizer, try another one or the old one if it works and see if that's the case.

Was this answer helpful?

Score 0
Add a comment

Add your answer

julio will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 580