Skip to main content

Released September 16, 2016. Model 1660, 1778 Available as GSM or CDMA / 32, 128 or 256 GB / Rose gold, gold, silver, black, and jet black.

2261 Questions View all

Replaced the microphone but now phone isn't charging.

My microphone stopped working a few days ago and so I bought a new microphone/charging port and then installed it using the help of a youtube guide. My microphone now works fine however my phone will no longer charge. Any help?

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Most Helpful Answer

Block Image

Block Image

A Few things can cause this issue,

  1. You received a bad charging port with a good Mic

2. The Charging Flex is not making a good connection to the board

3. You caused pry damage, knocking off or dislodging one of the small components in the surrounding area

But first, unplug battery, remove screen assembly (So you dont damage flex cables)… and measure the board for 5v dc at the test point to see if you are receiving voltage from the port when plugged in.

You can also measure the charging voltage at battery terminal if you are getting 5v to see if charging circuit is operating normally.

Post back results after these first 2 things and also look carefully for pry damage

Was this answer helpful?

Score 2
Add a comment

Add your answer

Luke Stuckey d will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 49