Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1491 Questions View all

Digitizer not responding after fall but no visible damage

Hi all,

the digitizer on my iPhone 3G is not responding at all after a fall, but there isn't any visible damage. I have no tools at hand to open the phone right now. What are the chances that the digitizer is broken or that a connector just came unplugged?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

cheap option is to open and check the connector 2. buying a new digitiser is pretty cheap and relatively easy to do. You might first like to try a reset and save even more hassle. hold power and home for 10 seconds until the apple appears, then release the button and allow to reboot,

Was this answer helpful?

Score 3

Comments:

Thanks. Tried forced reboot already and didn't help. Will open and check connectors first as soon as I have tools at hand. If that doesn't do the trick I will go for the new digitizer.

by

Add a comment

Add your answer

Simone Franzini will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 344