Fix Your Stuff Community Store

Released September 16, 2016. Model 1660, 1778 Available as GSM or CDMA / 32, 128 or 256 GB / Rose gold, gold, silver, black, and jet black.

2264 Questions View all

Options

iPhone 7 water damage not turn on

Hello. I have a problem with the flooded iPhone 7, it had a short circuit of 0.350a I was able to remove it now it is 0.000a after turning on nothing happens and stands at 0.060-0.080a. Have any ideas?

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

2 Answers

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

you need to clean it using isopropyl alcohol. that will involve completely disassembling it.

Electronics Water Damage

iPhone 7 Rear Case Replacement (you do not have to replace the rear case, but this guide will go over complete disassembly.

Was this answer helpful?

Yes No
Score 1

2 Comments:

pcb I already cleaned in an ultrasonic cleaner. A few capacitors fell in and there is no pmbb layout because it was short

by

@dxwxd ah, apologies. This is probably beyond my scope. @refectio could probably help here.

by

Add a comment

Options

halo cześć,

0,06A przy starcie wskazuje na niski bilans energetyczny. W takich przypadkach warto przestudiować linie główne zasilania. W większości przypadków, jeśli ich parametry mieszczą się w normie szukałbym “korka” za PMU. Sprawdź porty LDO z MPU i CPU razem z liniami SOC. Niewiele dalej, bo od 0.09 zaczynają się spięcia pod procesorem, spowodowane przegrzaniem 7-ki przy zdejmowaniu shield’ów.

pozdrawiam,

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

Dawid Wojtyła will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 98