Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1499 Questions View all

Stuck at Apple logo on turning on after re-build

Full re-build, new back, new audio socket harness, new battery, new glass. Re-build complete, turned on, only get Apple logo (no timer) which will not disappear. Have tried connecting to iTunes and using hard re-set, but nothing. Any ideas anyone? My daughter is giving me a hard time as it is her phone!!

Answered! View the answer I have this problem too

Is this a good question?

Score 0


By hard reset do you mean DFU mode or physically taking the logic board off the battery?


Add a comment

1 Answer

Chosen Solution

There is something that you just installed that could be causing this. I would try replacing the battery with the original one first. Sometimes it could be something as simple as a defective battery. Continue with the troubleshooting this way. There are certain ribbons you dont need to get the phone to boot. Ribbon #5 is the power button, but you can get it to boot by plugging it in the charger/computer. Like the other guy I told, try the #3 connector. Sometimes if this is kinked or damaged, it could easily cause boot issues.

see my answer here: Will not boot past apple logo!

Was this answer helpful?

Score 0
Add a comment

Add your answer

Mark will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 411