Skip to main content

Repair guides and support for your Samsung TV.

1538 Questions View all

No Backlight and No Image But Has Power

TV Model: PS59D8000

The TV turns on then it turns off after a short while. If I unplug the black cable to the tcon board as shown in the image below, it turns on and stays on.

Block Image

I have unplugged every other board and it does not stop it from turning off. Nor does it make the backlights work.

I am curious to whether the tcon board is what sends the signal to allow power to the backlight? I know it processes the image, but does it determine whether the backlights receive power? If so, I believe it could be the tcon board, but I am new to this. I also replaced the powerboard with a brand new one, which changed nothing.

Here is the entire TV backpanel:

Block Image

Any help is very much appreciated :)

Part numbers:

Powerboard: BN44-00447A

Main: BN94-04680C

Tcon: LJ41-09448A

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

Android Fix Kits

A new screen or battery is one kit away.

Shop Now

Android Fix Kits

A new screen or battery is one kit away.

Shop Now

1 Answer

Most Helpful Answer

@azcam what you are describing sounds like a bad t-con board. The Backlight is actually turned on by the mainboard however, a bad t-con board can prevent the backlight to come on. Try to connect it all back together. Then disconnect the main board form the power board and see if your backlight comes on.

Was this answer helpful?

Score 1

Comments:

If I disconnect the mainboard from the powerboard, I cant turn the tv on

by

Okay so you will Have to start with the t-con board since your tv stays on with it disconnected

by

Add a comment

Add your answer

A C will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 14