Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1490 Questions View all

How to put the back together again

To replace the back i fixit shows how to remove the ejector trigger which is screwed to the GPS. i fixit also mentions that some replacement backs do not have a predrilled hole into which the screw and trigger go to.

How do I put the trigger back in without a hole. I am afraid to just drill a hole since the tolerances are so close

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

i've just put one in by making a small hole with a pin to start it off and then using the screw as usual with a piece of foam under the case. just be careful with the pressure you apply-you don't want to crack the case.

Was this answer helpful?

Score 1
Add a comment

Add your answer

Dan will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 790