Fix Your Stuff Community Store

Released September 16, 2016. Models A1661, A1784, and A1785. Available in 32, 128, or 256 GB configurations in Rose gold, gold, silver, black, jet black, and (Product)Red.

1364 Questions View all

Options

iPhone 7 and 7 plus stuck on apple logo after replacing the housing bo

Hi, I replaced the housing body frame of Iphone 7 and 7 plus.

but after everything was installed on the new housing place and put the screen back, I tested out by turning on the phones. Then both of them stuck on Apple logo. I tried to hard reset but nothing works. Just to make sure if the charging is working but when I plugged it in, it doesn’t sound or vibrate at all.

Could someone suggest me what the potential issue here or what I can try…?

Answer this question I have this problem too

Is this a good question?

Yes No
Score 1
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

test them out of the housing with the logic board, screen, battery and charging dock connector and then do a prompt to boot a iphone

good luck

Was this answer helpful?

Yes No
Score 0

1 Comment:

Thank you for your advice. Did you mean that I should test them each by each by replacing each parts as you mentioned to find out which parts is causing this problem?

by

Add a comment

Add your answer

Alltech will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 56