Skip to main content

Repair information and guides for the iPhone 8 that was released on September 22, 2017. Model: A1863, A1905

873 Questions View all

battery replacement not connecting to port

I replaced my aunts phone battery but after a while the battery will disconnect to the port and it’ll say “ 0% remaining” and stay at 1%. I tried looking at it again and now the phone won’t turn on and the battery just won’t connect all together.

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Most Helpful Answer

If you are talking about the battery connector it is a common problem on the iPhone 8 I usually end up replacing it but for other people who suffer this after a battery replacement you might be able to manipulate the connector on the logic board with a pair of tweezers so as it fits in nice and firm.

Was this answer helpful?

Score 1
Add a comment

Add your answer

tamyla bento will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 2

All Time: 38