Model A1181 / 1.83, 2, 2.1, 2.13, 2.16, 2.2, or 2.4 GHz Core 2 Duo processor

1356 Questions View all

MacBook after logic board change some keyboard keys dont work

Hi guys.

In the last week had a problem with my Macbook (Apple MacBook "Core 2 Duo" 2.0 13"(White-09) S Ident: Early 2009 - MB881LL/A - MacBook5,2 - A1181 - 2300), I took for technical assistance and informed me that the problem was the logic board.

I decided to change the logic board on his own and presented some questions to make an upgrade here: Replace Logic Board MacBook, early to mid 2009

I replaced the board 820-2496-A (2.0GHz) 661-5242 by (2.13GHz) but the Macbook did not initialize. Do not plug the combo drive connector and turned on.

Block Image

Old:820-2496-A

Block Image

New:661-5242

But some keyboard keys are not responding (red below), and I'm stuck at the login screen.

Block Image

Both volume keys only increases

Block Image

Any tips?

Thanks...

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Possible that you damaged the keyboard ribbon cable. Reseat it and try again. Be careful, they are quite delicate.

Was this answer helpful?

Score 1

Comments:

Reset, but continued with the same problem.

I can buy this cable on iFixit?

by

Please. Someone could tell me if there is some difference between the topcase MacBook "Core 2 Duo" 2.13 13-Inch (White - Mid-2009) and MacBook "Core 2 Duo" 2.0 13-Inch (White - Early 2009)?

by

Add a comment

Add your answer

Thiago Pereira Rosa will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 1,349