Rep: 13
1
1
Hello,
i got some small to huge problems. After changin the display my iphone doesn´t start anymore. I took me some weeks to remove the old display and assmble everything. So could this be the problem?
I tried to connect it via usb but nothing happens, also i tried to press and hold the home and on/off button for more than 30 secs.
Nothing happend so far.
Thanks for your help..
Cheers
Jan
Is this a good question?
Rep: 31
3
This happened to me.
After replacing the screen, it continually displays the apple.
It appears that the ribbon cable labelled 3 was not correctly in place. Once this was corrected the iPhone runs fine.
Luc.
Was this answer helpful?
Rep: 217
4
Sounds to me like one of the many ribbon connectors isn't seated properly. Best dismantle it again and check they are all pressed firmly into place.
Was this answer helpful?
even i hv the same problem...i assembled it again but still its not turning on...
Rep: 13
1
this happened to me
i coulld even call the phone and it would ring but i couldnt pick it up
turns out that the top right power button needed cleaning, was a bit dusty
Was this answer helpful?
even i hv the same problem...i assembled it again but still its not turning on...
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 1,288
1 Comment
Mine too dont know what to do now
by Doreen Kashuku