Fix Your Stuff Community Store

Repair information and guides for the iPhone 6S Plus that was released on September 25, 2015. Model A1687, A1634

1041 Questions View all

Options

iPhone 6S Plus, no image

Hello iFixit forum users i have a question at the moment i have 6s plus, which one displays blank screen (no image), but u can connect to iTunes, it recognises i have tryed to swap, change LCD screen’s but problem stay the same no image. MY QUESTION WILL BE ON LOGIC BOARD WHICH ONE SMD DIODE, CAPACISTOR, IS RESPONSIBLE FOR LCD IMAGE? if any knows just write me down how they are named in Iphone 6s plus schematics. Thank u!

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0

3 Comments:

May I know how does it get recognized. Does it get recognized as "iPhone in Recovery Mode". If not, it may be your LCD screen. Before replacing, inspect the pins of the LCD and see if it doesn't have any bent pins. If there are no bent pins, inspect your motherboard. It may have bent pins or foreign objects that may prevent it from working properly.

by

fully working iphone without any signs of image just blank screen i have tryed to change LCD same issue

by

Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

iPhone 6s and 6splus series have same issues that i solved on that cases that is the Chestnut related issues.First clear about that there is no light present but logo shows or not that is not the software issues anymore.Some capacitor near LCD connector causes that problem.

Was this answer helpful?

Yes No
Score 0

1 Comment:

maybe it's FL4291? i have tested that it shows me 0.650. i have tryed to test lcd connector on logic board its starts from left side when u looking straitght to connector just is that 0.650 is not too high? should be around 0.550 ? as i know ? ? what do you think ?

by

Add a comment

Add your answer

Darius Varanavičius will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 145