Rep: 1
1
i have an iphone SE that is fallen while its charging and the screen goes black, i have tried to reset, change the display and change the battery but the problem still exists, itunes detects the iphone when is connected to the pc and i have already done the reset also with itunes, someone can have an idea of where the problem can be ? thanks
Is this a good question?
Rep: 1.1k
9
4
1
These iPhone SE’s tend to have a lot of problems. It because it came out after the iPhone 6 and 6s. They put a bigger processor than the iPhone 6 inside of the SE. The next step I would do is try reconnecting the battery connector and the screen connectors. If that doesn’t work I would take it in to a local 3rd party repair store. PLEASE DONT TAKE IT TO APPLE! The 3rd party repair store should be able to do a diagnostic on the phone. Hope nothings wrong with the phone. Best of luck!!!
Was this answer helpful?
thank you for the answer, i have tried to reconnect the connectors but the screen is still black, maybe there is a short on the logic board that i should not be able to find, i think i will contact a repair store, thank you again.
@Simone Any update on this?
Rep: 1
3
1
Reset the phone (no data loss): press both the home and power buttons for up to 1 minute, releasing when the Apple logo appears.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 2
All Time: 679
