Fix Your Stuff Community Store

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Questions View all

Options

Is this display connector broken?

Can anyone tell me if this display connector is looking good?

Block Image

The display brightness is not working correctly. I use a cheap eBay replacement display so before I order a new one I want to know if this connector looks good.

The 6th pin on the top looks weird to me..

Thanks!

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

2 Answers

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

For me, it's rather difficult to tell by just looking at this picture. Check carefully with tweezers if there is any unstable pins, which features poor contact with board.

It would be better if you have a multimeter to test the diode value of each pin on the connector. If it’s all normal value, then restart with a new display.

Was this answer helpful?

Yes No
Score 1

1 Comment:

Thanks! Will try to use tweezers and/or check with a multimeter.

by

Add a comment
Most Helpful Answer

Options

Looks okay, might need to clean up the connector a bit on the 6 pin. 99% isopropyl alcohol and some brushing should get that cleaned.

Otherwise be extremely careful with tweezers / exacto knife to clean that out without damaging the pin.

Was this answer helpful?

Yes No
Score 1

1 Comment:

Thanks for your comment. I've tried cleaning it with IPA two times but that didn't work. I will try to remove it with a tweezer.

by

Add a comment

Add your answer

Matthijs will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 44