Fix Your Stuff Community Store

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Questions View all

Options

battery won't charge after replacement

My phone won't charge past 1% after finishing the battery replacement. I carefully made sure all connectors were not bend and snapped back into place firmly and evenly including the battery connector. I have tried leaving it plugged in overnight as well as letting it discharge completely and then charging again. Did I get a bad replacement battery or is something else wrong? This is obviously very frustrating as my phone is now out of commission unless it is plugged in!

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

3 Answers

Filter by:
Most Helpful Newest Oldest

Options

From my experience, this sounds like a bad battery you’ve received. If you have the original and it isn’t destroyed from removal, try to to plug that guy back in. If not, i recommend this supplier for great quality products:

https://www.fixez.com/store/iphone/iphon...

Was this answer helpful?

Yes No
Score 0
Add a comment

Options

I assumed that since I got it from ifixit, it would work!! But they still haven’t responded to my inquiry and I’m left without a working phone. ARGH!!

Was this answer helpful?

Yes No
Score 0
Add a comment

Options

try the old battery, if that's the same issue then you have a damaged chip.

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

rich Burdeaux will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 42