Rep: 261
6
7
Hi does anyone have any advice on how to remove a screw that keeps the screen in place if the screw head is completely damaged and I cant get any of my screw drivers to catch to unscrew it?
Is this a good question?
Rep: 221.4k
15
289
807
Are you referring to the pentalobe screws on the bottom of the housing (on ether side of the charge port)?
If you’re screwdriver has no grip , you could try to put a stretched-out rubber band between the two or set it with epoxy. If the screwdriver has a bit of grip, then try gently prying the screen upward while trying to unscrew.
Was this answer helpful?
Sorry I dont understand your solution?, do you have a video?
the screw driver has no grip at all...
what type of epoxy are you referring to is it epoxy resin or glue, also how do i apply it, do i do it with the screw driver bonded to the screw???
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 68
