Skip to main content

Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1158 Questions View all

How come I can't see anything with my new front panel?

I replaced a cracked front panel with the 3G repair kit. However, when tried to switch my Iphone back on, I can't see anything. If if turn on the silent button on the side, my phone vibrates, which must mean the Iphone is on but the screen isn't working.

I checked the connectors, but everything is fine. How is this possible?

Thank you

Answered! View the answer I have this problem too

Is this a good question?

Score -1
1 Comment

Waw, it works!

Thank you very much!

Annelien

by

Add a comment

2 Answers

Chosen Solution

have you tried hard reset? press home and power for 10 seconds, apple logo should appear, then release buttons and allow to reboot.

Was this answer helpful?

Score 2
Add a comment

This job can be painful... Connector 3 is a swine to replace, I have found that the other two can 'pop' back off.

Its worth powering up to check before replacing the LCD assembly in the frame.

Just a thought

Was this answer helpful?

Score 0
Add a comment

Add your answer

anneliendegadt will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 819