Fix Your Stuff Community Store

Released September 16, 2016. Model 1660, 1778 Available as GSM or CDMA / 32, 128 or 256 GB / Rose gold, gold, silver, black, and jet black.

2264 Questions View all

Options

Constant restarts after screen replacement

I’ve just made a screen and home buttton replacement on my iPhone 7, when i turn on the device the white screen with the apple logo appears it then shuts off and restarts. Ive dismantled it and the rebuilt it marking sure everything is correct but still get the same outcome. Any advice would be greatly appreciated

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

Did you replace the Home Button with a replacement button or did you just transfer the original HB? Replacement Home Buttons don’t work…at all…and in some cases, they will actually impede the device from booting.

Normally, you want to transfer the original HB when you replace a screen. If the original HB was also damaged or defective, then only Apple can replace it with a functioning unit. Any third-party replacement HB is for cosmetic purposes only (it fills the hole). Some can be connected without any issues but other times, connecting it actually causes issues with the logic board.

Was this answer helpful?

Yes No
Score 3

1 Comment:

Thanks Minho. The original HB was damaged and I replaced it with a cosmetic one but I didn't realise this may have been the issue.

by

Add a comment

Add your answer

Henry laloe will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 52