Skip to main content

Second generation of CDMA iPad 2 with 16, 32, or 64 GB and Dual Core A5 Processor. Model Number A1397. Repair is detailed and requires heat and prying.

64 Questions View all

Digitizer not working after replacement

Hello. A few years ago, my iPad 2 have been exposured to high pressure in my bag. And as you can guess, it’s digitizer stopped working. I’ve taken it to some phone repair services, but they couldn’t fixed it. And yesterday I wanted to give it one more shot. And bought a new digitizer. And few hours ago I have connected the digitizer to the device. But it did not work at all. And now I’m thinking to change the logic board completely. Can this solve the problem? Thanks in advance.

And here is the photo of digitizer pin;

Block Image

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

PC Laptop Batteries

An easy fix for a big power boost.

Shop Now

PC Laptop Batteries

An easy fix for a big power boost.

Shop Now

1 Answer

Did any of the repair shops give a reason why they couldn’t fix it? Replacing the logic board will fix the problem, because you’re basically replacing the complete internals of the iPad. I’m assuming for the cost and time associated to replacing the board that it would be beneficial to just buy a newer iPad instead since the iPad 2 is pretty old.

Was this answer helpful?

Score 0
Add a comment

Add your answer

Utku Aydın will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 17