Fix Your Stuff Community Store

Repair and support for the third generation of the Flip portable speaker by JBL.

70 Questions View all

Options

1r5 disconnected. Have to push down to make work .

I diagnosed that my 1R5 inductor is not detchted but loose. It seems I have to push back toward the wall to make the speaker work. But if I let go the speaker stops working. This was caused by a drop. I have a Jbl flip 3.

How do I keep the 1r5 to stay pressed down so my speaker works.

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

hey austin,

as a general recomendation i would suggest to look if you can see if the connector to the main board is still correctly soldered in place and to see if you can solder it back on or replace the 1r5 if that doesn’t fix it just stay safe and good luck

-M

Was this answer helpful?

Yes No
Score 1
Add a comment

Add your answer

austin johnson will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 485