No video dislay or backlight Diagnostic LEDS 1,2 lit, LED 3 flashes
My Intel Mac has died! No video or back-light. I get the start up chime and the HDD sounds like it is doing something.
Diag LEDS 1 and 2 come on and LED 3 flashes momentarily.
I can load/unload CD's, and the power button seems to put system to sleep and pressing a key seems to wake it up too.
I have checked that the VGA card is not obviously damaged.
tried resetting the SMC and the PRAM to no avail (not surprised really)
Sounds like either the VGA or the Logic boards have died!
Is this a good question?
5 Comments
Apple iMac "Core 2 Duo" 2.4 20-Inch (Early 2008) Specs
Identifiers: Early 2008 - MB323LL/A - iMac8,1 - A1224 - 2210
or the 2,66 GHz model
by mayer
2.4GHz - HD2400XT VGA
by Richdave
the VGA is Kaput! Guess this baby is destined for the scrapheap...
by Richdave
richdave, Here is an excellent forum on modding/hacking video chip firmware for the Mac.
by ABCellars
Thanks ABC Cellars.. not sure if I will find a solution there but it will be quite a few hours of interesting reading...
by Richdave