Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 16 or 32 GB capacity / black or white plastic back.

1961 Questions View all

iPhone freezes at apple logo after replacing screen


i just replaces my iphone screen and now it won't turn on or off.

It stays at the apple logo screen, sometimes with that loop circle.

It won't turn off, go into DFU mode or anything.

All the cables seem to be in its place.

What should i do?

Thanks in advance

Answer this question I have this problem too

Is this a good question?

Score 1
Add a comment

Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

Browse Our Store

3 Answers

Most Helpful Answer

You may need to lift the logic board off the battery to shut off the phone. Then you can try to turn the phone on again and see if the issue persists. Use this guide:

iPhone 3GS Logic Board Replacement

Was this answer helpful?

Score 1
Add a comment

i have this problem also.. just stays on the circle thing.

have removed the logic board and made sure all connections were clean.. do u think its battery related or logic board related??

Was this answer helpful?

Score 0
Add a comment

I have had this some time earlier exactly the same issue.

Problem is most likely caused by cable #3 which is not good seated or damaged.

Try to start the phone without cable #3 to see if this helps. If it help reseat the #3 cable properly or replace it if neccesarry.

Was this answer helpful?

Score 0
Add a comment

Add your answer

mayreis will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,240