Rep: 25
1
The car starts but stalls immediately. I scanned for codes and I saw oxygen sensor bank 1 sensor 1. However, the MAF sensor shows no data. I unplugged it and yet it is the same. I got another MAF sensor and I can see data. But car still dies immediately after starting.
Is this a good question?
Rep: 51
2
Reset the computer if you can and try starting it again. and try revving it once it starts to keep it from stalling. like to 1.5 or 2k rpm
Was this answer helpful?
Past 24 Hours: 2
Past 7 Days: 4
Past 30 Days: 12
All Time: 791
