The Alpha key used to create fraction will not respond when in Y=
The alpha key es not respond when in the Y= ? How do I fix this?
Is this a good question?
The alpha key es not respond when in the Y= ? How do I fix this?
Is this a good question?
If your batteries were corroded or the button doesn’t work anywhere, use the My calculator turns on but unresponsive to the keyboard. to diagnose your issue.
However, since your title implies Alpha works everywhere except in the y= page, I’ll have to assume this is a software bug. The easiest way that could fix your issue is to simply turn the calculator off and back on again, then see if it works.
If it doesn’t work, then try a RAM reset. You can do this by [2nd]>[+]>[7]>[1]>[2] or by:
If that still doesn’t work, then it’s time to reinstall the OS. It’s not easy to describe in text how to do this so I’ll refer you to a video tutorial. Make sure you have the latest TI-OS on your computer and the correct connectivity software installed.
Was this answer helpful?
this did not help, I did all of the solutions and the calculator still will not do fractions when clicking alpha/y=enter
Was this answer helpful?
Past 24 Hours: 4
Past 7 Days: 37
Past 30 Days: 198
All Time: 11,115
2 Comments
@thelastmill Ideas?
by [deleted]
Hi @agbyrd75
Try to follow this instruction provided below:
My calculator turns on but unresponsive to the keyboard..
by Augustine