Fix Your Stuff Community Store

Repair and disassembly guides and support for dish washing appliances.

702 Questions View all

Options

power surged and then the e2 f2 code started flashing

My dishwasher is only about a year and a half old. We had a bad storm yesterday...my power surged and then the e2 f2 code started flashing. Did the reset, took the door off and checked connections...still flashing. Do I randomly start buying parts? How do I check to see if it’s something I can fix? I am handy, but appliances are new territory for me. All info. is appreciated.

Update (10/25/2018)

Block Image

Block Image

Block Image

Block Image

Update (10/25/2018)

Block Image

Block Image

Answer this question I have this problem too

Is this a good question?

Yes No
Score 1
2 Comments

We have the same model and issue, did you come up with a solution

by

I have the same model and same problem. Did you get it fixed?

by

Add a comment

3 Answers

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

The e2 f2 error usually means main control board is not getting correct signal from the user interface. Turn off power/breaker, remove screws holding inner door liner, remove liner and check/secure/clean all wire connections from front interface and main control board. The number you gave me an oven, please check it for accuracy.

Was this answer helpful?

Yes No
Score 3
Add a comment

Options

In cases like this, the control module has been effected. This can be as simple as an open internal fuse or more complicated like a smoked controller IC. In either case, knowing the exact make and model is critical. Please update this with the make and model. Also, a Google search of the model number and the keyword “parts” should get you to a site to check for parts availability. If you can post a picture of the control module, we may be able to see a damaged part that can be replaced as a start.

Dan

Was this answer helpful?

Yes No
Score 1

1 Comment:

Thank you. I’m adding a comment below with some pics.

by

Add a comment

Options

Replaced the control module

Was this answer helpful?

Yes No
Score 1
Add a comment

Add your answer

deew1015 will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 13

Past 30 Days: 41

All Time: 3,208