Rep: 65
2
1
Hi I changed the housing on an iPhone 8 and the metal bracket around the charging port wasn’t present on the new housing. I tried to remove it from the original and it was hard to remove and bent quite a bit.
Is it possible to buy new brackets and replace or can these not be replaced?
This is an example of one but for an iPhone 6….
Is this a good question?
Rep: 26.4k
113
52
62
Is this what you are talking about? If so, yes! You are in luck.
Was this answer helpful?
Thanks but nope...
It's the same as this bit (but this is an iPhone 6 pic)
@chrisinuk Phooey! I don't think you can buy that particular part for your model iPhone. If I were you I would try my best to make do with your existing bracket. Sorry I couldn't help!
Rep: 13
5
This is way old but I came across the same problem, it came with the part, but not installed. It’s one of these
https://www.ebay.co.uk/itm/SILVER-Replac...
I can’t find anything on how to fit it correctly.
Was this answer helpful?
Just glue it with some 800 glue or superglue. That’s what I ended up doing.
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 197
