Fix Your Stuff Community Store

Model A1181: 1.83, 2, 2.1, 2.13, 2.16, 2.2, or 2.4 GHz Core 2 Duo processor

1203 Questions View all

Options

New logic board - System Serial Number

I installed a New logic board with your Ifixit instructions and it works perfectly. However when I go to Hardware Overview the System Serial Number shows "SystemSerialNumb". My question is how do I place my machine SN in place of this message?

To clarify, I am thinking that the serial number shown in hardware overview is the machine sn and not the logic board sn. This is what my other Macs show.

Thank you for your reply.

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 1
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

Showing of "SystemSerialNumb" is normal when the Logicboard has replaced. Normally an AASP would write the original Serialnumber from the Notebook back to the SN Rom in the Logicboard. In your case there is no solution for that. But normaly it is not necessary at all.

Was this answer helpful?

Yes No
Score 1
Add a comment

Add your answer

dunamis7 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 3,171