Fix Your Stuff Community Store

Repair guides and support for your Samsung TV.

2610 Questions View all

Options

How do I remove my back panel?

I had an UN65MU6290 for 3 months before 1/3 of the screen became darker than the rest. Now the whole screen is dark but there is power and the sound works. My assumption was an LED strip needed replacing but there are no screws on the back to remove. I was able to pry loose the bezel from the top and sides but the bottom will not budge at all. The bottom has cracked in several spots from my failed attempts. Ideas??

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

Hi,

Have you seen this video?

Not the same model as yours but perhaps the same way of removing the back cover. View from about 2:30 minutes into the video

Was this answer helpful?

Yes No
Score 3

1 Comment:

It gave me some hints but with his TV the bezel didn't interfere with undoing the clips. The bezel on mine can be bent and moved partially but I was too rough and now need to replace it. At least now I've been able to get to all clips holding the back in place.

Where I am now is the plastic clips holding the last 2 layers in place to get to the LED strips. Every video I've seen so far shows simple plastic prings that can be squeezed and pushed through holes. These are different.

by

Add a comment

Add your answer

ransoma99 will be eternally grateful.
View Statistics:

Past 24 Hours: 6

Past 7 Days: 28

Past 30 Days: 135

All Time: 26,168