The battery was replaced last year. Still not holding a charge. I purchased the mag port replacement part. Do I need to get the logic board or the I/O board. Or is there some other part I need to get that is related to this type of problem?
Is this a good question?
Rep: 26.3k
113
52
62
@danj you posted an invalid link, heres a corrected version.
Lets get a bit more diagnostics, complete the guide I have attached below. Don’t forget to attach an image of the coconutBattery window with the charger plugged in and a second image of the coconutBattery image without the charger plugged in! If you are unsure how to attach an image to your existing question I have also included a guide on how to do that also.
Guide
Difficulty:
Very easy
—
2 - 5 minutes
Guide
Difficulty:
Very easy
—
3 - 5 minutes
Was this answer helpful?
@ajcooke01 - ??? My links are just fine!
@danj Ok, now they are. iFixit has been really wonky for me today. Sorry about that!
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 43
1 Comment
Lets get a bit more diagnostics, install this gem of an app CoconutBattery then post a snapshot here for us to see Adding images to an existing question. Do one with the charger plugged in and if you can do a second with it disconnected.
by Dan